AMX RMS CODECRAFTER Informações Técnicas descarregar pdf (Página 22)

Network Configuration

RMS Administrator’s Guide

command in NetLinx programming. If using the ServerInfo.txt file, append a ":"

and the port number to the server IP address or host name.

The RMS application 1.0 used port 9090 for communications. If you are

upgrading from MeetingManager 1.0, you may wish to continue to use port 9090.

During the upgrade process, you are prompted to change to port 3839 or continue

to use port 9090. Port 3839 is the new port going forward and 9090 is not

backward compatible. If you change to port 3839, you need to upgrade all

NetLinx systems to use the modules from the latest version of the RMS SDK.

The RMSEngineMod module uses port 3839 as the default port internally. You

can use the old module, MeetingManagerEngineMod, if you add ":3839" to the

server command used to configure the server address. You can use port 9090 with

all RMS application NetLinx systems.

Once a NetLinx system has been programmed with the RMS modules and the

server's IP address or HostName, the NetLinx system automatically connects to

the RMS server.

RMS Application Install Checklist

Is the RMS server's host name registered with your DNS server?

Yes • Configure each NetLinx system to point to the correct DNS server and obtain the

HostName from the network Administrator to use in the 'SERVER-' command.

The DNS server configuration will be picked up automatically through DHCP if the

DNS servers are registered with the DHCP server.

Note: To verify your NetLinx system can resolve the DNS name of the RMS server,

connect to the NetLinx master using TELNET and use the PING command to

determine if the RMS server DNS name can be resolved.

No • Determine the IP address of the RMS server from the network Administrator to

use in the 'SERVER-' command.

Do you want to use 3839 as the TCP/IP port for communications between NetLinx

and the RMS server?

Yes • No changes need to be made in either RMS or NetLinx.

No • Configure the TCP/IP in the RMS server using the Configuration Wizard and

supply the new port to the NetLinx programmer to use in the 'SERVER-'

command.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 373 374

Sem comentários

AMX RMS CODECRAFTER Informações Técnicas Página 22