AMX NXB-CCG-K Informações Técnicas descarregar pdf (Página 19)

Lutron® integration protocol

SYSTEM Command Formats

SYSTEM Command-speciﬁc ﬁelds

Action Numbers and Parameters:

Action Action Number Parameters

Set (#) or Get (?)Time

1 Time in: SS.ss, SS, MM:SS, or HH:MM:SS

Set or Get Date 2 Date in MM/DD/YYY

Set or Get Latitude and

Longitude

4 Latitude = –90.00 to +90.00 degrees

Longitude = –180.00 to +180.00 degrees

Set or Get Time Zone

5 Hours = –12 to 12

Minutes = 0 to 59

Get Sunset 6 None

Get Sunrise 7 None

Get OS Rev 8 None

Set Load Shed

11 0 = Disabled

1 = Enabled

NOTES

1. The system time must be entered in 24 hour format.

2. The Time Zone is referenced to GMT.

3. Load Shed commands available only on Quantum® version 2.0 and higher.

Example SYSTEM Messages

Operation Command String

Execute: #SYSTEM, Action Number, Parameters

Set time to 5:45 PM. #SYSTEM,1,17:45<CR><LF>

Set date to June 1, 2009. #SYSTEM,2,06/01/2009<CR><LF>

Query: ?SYSTEM, Action Number

What is the system time? ?SYSTEM,1<CR><LF>

What is the system date? ?SYSTEM,2<CR><LF>

Response: ~SYSTEM, Action Number, Parameters

The system time is 11:05 AM. ~SYSTEM,1,11:05:00<CR><LF>

The system date is July 3, 2009. ~SYSTEM,2,07/03/2009<CR><LF>

Use “SYSTEM Command-speciﬁc ﬁelds” tables to

complete these command ﬁelds.

Operation

Command

#SYSTEM, Action Number, Parameters

Integrator’s Reference (continued)

SYSTEM

: Command Summary

SYSTEM Command provides support for location, device and system speciﬁc information

(e.g., Date, Time, Software Version Numbers).

NOTE

1. Not supported in QS Standalone.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 143 144

Comentários a estes Manuais

Sem comentários

AMX NXB-CCG-K Informações Técnicas Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores AMX NXB-CCG-K