AMX TPI-PRO-2 Especificações descarregar pdf (Página 42)

Configuring Communication Settings

TPI-PRO/DVI (Total Presentation Interface)

The basic steps involved with configuring the TPI-PRO/DVI’s communications settings include:

1. Assign a Device Number to the TPI-PRO/DVI (see page 40).

2. Set the Serial Port Baud Rate (see page 41).

3. Configure the Master Connection Settings (see page 42).

Assigning a Device Number to the TPI-PRO/DVI

Press the front panel SETUP pushbutton to open the Setup page (FIG. 35).

2. Press the Protected Setup button to open the Protected Setup page. This page is password-protected:

a. Use the on-screen keypad to enter the default password - 1988.

b. Press Done to close the keypad (FIG. 36).

3. Enter a Device Number value for the TPI-PRO/DVI (FIG. 36):

a. Press the red Device ID field to open the keypad.

b. Enter a Device Number value for the TPI-PRO/DVI.

c. Press Done to assign the device number close the keypad.

 The default value is 10001

 Range = 1 - 32000

 When using multiple TPI-PRO-DVIs within a NetLinx System, assign unique Device Number

values to each TPI-PRO/DVI.

FIG. 35 Setup page - Protected Setup button

Press to access the

Protected Setup page

(password-protected)

Clearing Password #5 from the initial Password Setup page, removes the need for

you to enter the default password before accessing the Protected Setup page.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 193 194

Sem comentários

AMX TPI-PRO-2 Especificações Página 42