AMX TPI-PRO-2 Especificações descarregar pdf (Página 38)

Configuring the TPI-PRO/DVI

TPI-PRO/DVI (Total Presentation Interface)

Verify that the selected Touch Input Driver matches the connected touch monitor.

Refer to the Available Pixel Display and Refresh Rates section on page 163 for a comprehensive list of Touch

Monitors that have been tested with the TPI-PRO/DVI.

Calibrating the TPI-PRO/DVI

Use the Calibration page to calibrate the touch input on a connected touch panel with the TPI-PRO/DVI. The

Calibration page can be accessed via the CALIBRATE pushbutton on the front panel, or via the Calibrate

option in the Protected Setup page.

 If no touch device is detected, the Calibration page is not available. In this case, the TPI-PRO/DVI

will ignore any attempt to open the Calibration page.

 If the wrong touch driver is selected prior to the calibration process, press any of the front-panel

pushbuttons to exit the Calibration page (and select a different touch driver).

Calibrating the TPI-PRO/DVI Using a USB Input

Connect a USB cable from a touch monitor to one of the Type-A USB ports on the front or back of the

TPI-PRO/DVI.

2. Press the POWER button on the front panel to reboot the TPI-PRO/DVI and allow the unit to detect the

new hardware.

3. Press the CALIBRATE button on the front panel (see FIG. 29 on page 33) to open the Calibration page.

4. Press the crosshairs to set the calibration points on the LCD.

5. After the "Calibration Successful." message appears, press anywhere to return to the Setup page. If the

calibration fails, attempt to calibrate again. If unsuccessful, call AMX Tech Support.

FIG. 31 Panel Information page

Select Nulltouch when using

a non-touch monitor

Go to http://www.amx.com//techdocs/TPI-PRO.Supported.Touch.Monitors.xls to

view/download the most recent List of Touch Monitors and USB Touch Drivers Tested

with the TPI-Pro (including the most current listing of tested serial touch panel

drivers).

If you are using a non-touch enabled monitor, DO NOT PRESS THE CALIBRATE

BUTTON. Refer to the Setting the Output Resolution section on page 34 for screen

adjustment procedures.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 193 194

Sem comentários

AMX TPI-PRO-2 Especificações Página 38