AMX TPI-PRO-2 Especificações descarregar pdf (Página 40)

Configuring the TPI-PRO/DVI

TPI-PRO/DVI (Total Presentation Interface)

6. Press the Protected Setup button (located on the lower-left of the panel page) to open the Protected Setup

page (see FIG. 32 on page 37).

7. Enter 1988 into the Keypad’s password field and press Done when finished.

8. Press the on-screen Reboot button to cycle power to the TPI-PRO/DVI and incorporate the new settings.

The touch monitor goes blank for a few seconds during the reboot process. You can also use a mouse to

press the on-screen Reboot button.

9. Upon start-up, press anywhere on the screen to return to the Protected Setup page and begin defining the

communication properties.

Other Configuration Pages

 For instructions on using the TPI-PRO/DVI Configuration pages to configure communication

options for the TPI-PRO/DVI, and establish communication between the TPI-PRO/DVI and the

NetLinx Master, refer to the Configuring Communication Settings section on page 39.

 For descriptions of all of the TPI-PRO/DVI Configuration pages and their options, refer to the TPI-

PRO/DVI Configuration Pages section on page 55.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 193 194

Sem comentários

AMX TPI-PRO-2 Especificações Página 40