AMX IRLIB Manual do Utilizador descarregar pdf (Página 27)

KI-1856C Rauland RANGER

Head End—

Installation

Page 27 of 55 (Jun-98)

Parts Required

Transmitter Cable (

RANIRCABLE

per

device). This cable is supplied with the

RANIR

Infrared Control Card.

programming file to match the device that you are installing (if the device was not

provided by Rauland-Borg, you may need to send the manufacturer's remote to

Rauland-Borg) or learn the codes using the

RANIRIS

Infrared Capture Unit.

Associated Equipment

RANCC

Control Card Cage (see

RANCC

16 for more information)

RANIRIS

Infrared Capture Unit (optional)

IRLIB

program (supplied with all

RANGER

systems)

Installation

Note: Discharge

static electricity

from your clothes

or body before

handling the

RANIR

card. Touch a metal

surface to ground

yourself or use a

grounding strap.

Note: You may use

any

RANCC

16 (#1)

slot except for 5

and 16, which are

reserved by the

system for

controlling the

Video Matrix

Switch and

communicating

with control system,

respectively.

If you have not already done so, mount the

RANCC

16 into the rack.

If it is not already off, remove the front panel of the

RANCC

16 by loosening the fou

small thumbscrews.

Slide the

RANIR

card between the upper and lower white guides on the

RANCC

until it snaps into place.

If you will not be installing additional cards, replace the front panel of the

RANCC

16.

Downloading

codes to a

RANIR

card

Launching the

IRLIB

Program

From Windows Program Manager, find the

RANGER

Configuration program group

and open it (it should look similar to Figure).The

RANGER

Configuration programs

are

DOS

programs that will be run under Windows. If the computer has only one

COM

port available for the

RANGER

system

close Media

before starting

IRLIB.

Figure 8.

RANGER

Configuration Group

Launch the

IRLIB

program by double-clicking on the “Configure

Devices” program

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 54 55

Comentários a estes Manuais

Sem comentários

AMX IRLIB Manual do Utilizador Página 27

Comentários a estes Manuais

Manuais e produtos relacionados com Software AMX IRLIB