AMX RPMLoader Manual do Utilizador descarregar pdf (Página 8)

Configuring the NXB-CCG

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

default Username = Admin

default Password = 1988

5. Press LOGIN to open the NXB-CCG’s WebConsole to it’s initial view - the Configure page.

6. Open the Add Devices page (FIG. 7):

Configuring the NXB-CCG to Use a Static IP Address

By default, the NXB-CCG uses DHCP for network addressing. However, the option to manually assign a static IP

address is available via the Configure page - Settings tab (FIG. 8):

Refer to the NXB-CCG Operation/Reference Guide for details on using the Gateway’s WebConsole to configure the

device.

FIG. 7 NXB-CCG WebConsole - Add Devices page

Alternatively, the NetLinx Studio software application (available online at

www.amx.com) can be used to access the WebConsole as described above. Refer to

the online help for details on using NetLinx Studio.

FIG. 8 Configure - Settings tab

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sem comentários

AMX RPMLoader Manual do Utilizador Página 8