AMX RPMLoader Manual do Utilizador descarregar pdf (Página 7)

Configuring the NXB-CCG

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

Configuring the NXB-CCG

Overview

In order for the NXB-CCG NetLinx Clear Connect Gateway to work with the settings specified in RPM, there are

settings that need to be configured on the NXB-CCG. The settings described in this section are configured via the setup

pages in the NXB-CCG’s online WebConsole.

Accessing the NXB-CCG WebConsole

Accessing the NXB-CCG’s WebConsole requires that the NXB-CCG is connected to a NetLinx Master and is powered

on. Use the NetLinx Studio software application (available online at www.amx.com) to access the WebConsole as

described below:

Use the Zero Configuration Bar in RPMLoader to access the WebConsole as described below:

1. In RPMLoader, select View > Zero Configuration Bar to display the Zero Configuration Bar (initially empty).

2. Right-click inside the Zero-Configuration Bar and select Refresh Zero Config List. This will generate list of all

Zero-Configuration enabled devices connected to the Master. An example is shown in FIG. 5:

3. Right-click on the NXB-CCG in the Zero-Config devices list and select Launch Web Configuration Page via

Default Browser.

4. Enter the default login information (FIG. 6):

Refer to the NXB-CCG Operation/Reference Guide (available online at

www.amx.com) for details on installing the NXB-CCG.

FIG. 5 RPMLoader - Example Zero Configuration Device List with NXB-CCG

FIG. 6 NXB-CCG WebConsole - Login page

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Sem comentários

AMX RPMLoader Manual do Utilizador Página 7