AMX MAX-CSD 10 Manual do Utilizador descarregar pdf (Página 22)

22 Installation of GRAFIK5000 / GRAFIK6000 / GRAFIK7000 System

Processor Panels

There are no maintenance requirements for

these products. Clean the front cover as

needed.

Other

See instructions supplied with individual

products for any other recommendations for

maintenance.

Lutron products are designed to have minimal

maintenance requirements.

Control Station Devices (CSDs)

Clean front surface with a soft towel moistened

with a mild soap solution (non-ammonia

based). Clean approximately every six months.

Do not spray cleaning solution directly at any

CSD.

Power Panels

Visually inspect installation periodically - keep

air flow clear of obstructions. Power panels

generally need 12 in. (300 mm) of clearance

above, below, and in front of the enclosure.

Maintain the System

Warning

When working on any load (such as

rewiring a load), replace the bypass

jumpers to protect the Power Panels

until the load is proven.

Danger

Any liquid entering products with line

(mains) voltage may reach internal

components, cause personal injury,

damage the equipment, and void the

warranty.

Danger

Turn power off before working on any

load. See instructions supplied with

individual Power Panels.

1 2 ... 17 18 19 20 21 22 23 24

Sem comentários

AMX MAX-CSD 10 Manual do Utilizador Página 22