
SIMATIC S7-1200
Digital modules
SM 1223 digital input/output module
4/54
Siemens ST 70 · 2011
■
Technical specifications (continued)
Input characteristic
curve acc. to
IEC 1131, Type 1
Yes Yes Yes Yes Yes
Input voltage
• Rated value, AC 230 V
• Rated value, DC
24 V 24 V 24 V 24 V
• for signal "0" 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA 20 V AC at 1 mA
• for signal "1"
15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mA 79 V AC at 2.5 mA
Input current
• for signal "0", max.
(permissible quiescent
current)
1mA 1mA 1mA 1mA 1mA
• for signal "1", min. 2.5 mA 2.5 mA 2.5 mA 2.5 mA 2.5 mA
• for signal "1", typ. 4 mA; typical 4mA; typical 4 mA; typical 4 mA; typical 9 mA; typical
Input delay (for rated
value of input voltage)
• for standard inputs
- parameterizable Yes; 0.2, 0.4, 0.8, 1.6,
3.2, 6.4, and 12.8 ms,
selectable in groups
of four
Yes; 0.2, 0.4, 0.8, 1.6,
3.2, 6.4, and 12.8 ms,
selectable in groups
of four
Yes; 0.2, 0.4, 0.8, 1.6,
3.2, 6.4, and 12.8 ms,
selectable in groups
of four
Yes; 0.2, 0.4, 0.8, 1.6,
3.2, 6.4, and 12.8 ms,
selectable in groups
of four
Yes; 0.2, 0.4, 0.8, 1.6,
3.2, 6.4, and 12.8 ms,
selectable in groups
of four
• for interrupt inputs
- parameterizable Yes Yes Yes Yes Yes
Cable length
• Cable length, shielded,
max.
500 m 500 m 500 m 500 m 500 m
• Cable length
unshielded, max.
300 m 300 m 300 m 300 m 300 m
Digital outputs
Number of digital
outputs
8 16 8 16 8
• in groups of
1 1 2 4 2
Short-circuit protection No; to be provided
externally
No; to be provided
externally
No; to be provided
externally
No; to be provided
externally
No; to be provided
externally
Limitation of inductive
shutdown voltage to
L+ (-48 V) L+ (-48 V)
Switching capacity of
the outputs
• with resistive load,
max.
0.5 A 0.5 A 2A 2A 2A
• on lamp load, max. 5W 5W 30 W DC ; 200 W AC 30 W DC ; 200 W AC 30 W DC ; 200 W AC
Output voltage
• Rated value (AC) 5 to 250 V AC 5 to 250 V AC 5 to 250 V AC
• Rated value (DC) 24 V 24 V 5 to 30 V AC 5 to 30 V AC 5 to 30 V DC
• for signal "0" (DC),
max.
0.1 V; with 10 kOhm
load
0.1 V; with 10 kOhm
load
• for signal "1", min. 20 V DC 20 V DC
Output current
• for signal "1" permis-
sible range, max.
0.5 A 0.5 A 2A 2A 2A
• for signal "0" residual
current, max.
10 μA 10 μA
Output delay with
resistive load
• 0 to "1", max. 50 μs 50 μs 10 ms 10 ms 10 ms
• 1 to "0", max.
200 μs 200 μs 10 ms 10 ms 10 ms
6ES7 223-1BH30-
0XB0
6ES7 223-1BL30-
0XB0
6ES7 223-1PH30-
0XB0
6ES7 223-1PL30-
0XB0
6ES7 223-1QH30-
0XB0
© Siemens AG 2011
© Siemens AG 2011
Comentários a estes Manuais