AMX RADIA LIGHTING CONTROL SYSTEM (CONTROLLERMODULESCARDS) Manual do Utilizador descarregar pdf (Página 5)

Radio universal trans-

mitter 2 for use with

conventional switches

The radio universal trans-

mitter 2 detects the 230 V

signals of conventional

switches and push but-

tons and converts them to

radio commands. Through

the additional connection

for the constant power

supply, available at the

installation site anyway,

dimming telegrams are

also possible.

The compact device is

located behind the flush-

mounted 230 V inserts

in the flush-mounted box.

In this way, existing sen-

sors can also be integrated

easily into the Gira radio

bus system.

The radio universal trans-

mitter 2 can be used with

the covers and frames of

all Gira switch ranges.

l Wall lamp E

l Wall lamp E

# Awning $

l Lighting overall E

Radio wall transmitter

insert for use with

Gira push button sensors

The push button sensor

(without controller) well

known from the Gira

Instabus KNX/EIB system

can be easily attached to

the radio wall transmitter

insert. In addition to

simple switching and

dimming commands,

lights or blinds can be

controlled centrally and

light scenes can be pro-

grammed. “All off” and

“all on” commands are

also possible.

This radio wall transmitter

is ideally suited toward

installation in an existing

flush-mounted box and

can be combined with

the covers and frames

of all Gira switch ranges.

It can also be operated

trouble-free in the cover

frames made of metal.

++

Radio wall transmitter,

flat design

The radio wall transmitter

is characterised by an

especially flat design.

The device can also be

adhered directly to

smooth surfaces such as

glass and wood without

any additional housing.

Free of the need for a

mains connection, it can

be attached wherever

operating points are nee-

ded. Previously installed

switches and switch

combinations can also

be expanded quickly and

cleanly with additional

operating points using

the radio wall transmitter.

The radio wall transmitter

is available in 1- and

3-gang designs in trans-

parent mint or transparent

white in the design of

the Gira switch ranges

Standard 55, E2, Event

and Esprit.

Note: The device cannot

be used with the metal

frames from Gira Esprit.

Light and light-scene control via radio:

Switch and dim multiple lights at one time

and from a single location.

Application example with:

01 Flat radio wall transmitter

02 Radio switching actuator

03 Radio top unit for switching and dimming

04 Radio socket outlet adapter

03

02

01

04

The radio wall transmitters

5

43872_Fachinfo_Funkbus_GB 24.08.2005 9:03 Uhr Seite 5

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comentários a estes Manuais

Sem comentários