AMX MAX-HT12T Manual de Instruções descarregar pdf (Página 23)

MXT/D-1000 - 10.1" X Series Panels

MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels

1. Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.

2. After ensuring proper placement, cut out the mounting surface for the Backbox, using the included Installation

Template as a guide.

3. Thread the incoming cables through the surface opening (FIG. 19 and FIG. 20).

Leave enough slack in the wiring to accommodate any re-positioning of the panel.

FIG. 18 10" Installation Template

9 7/8"

8 3/4"

5 1/2"

6 3/4"

(13.97 m)

(17.15cm)

(25.08cm)

(22.23cm)

Making sure the actual cutout opening is slightly smaller than the provided

dimensions is highly recommended. This provides a margin for error if the opening

needs to be expanded. Too little wall material removed is always better than too

much.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 61 62

Sem comentários

AMX MAX-HT12T Manual de Instruções Página 23