AMX USB LAN Driver USBLAN Instruções de Operação descarregar pdf (Página 7)

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 7

What You Need to Install the cRIO-9030

 The NI cRIO-9030 shipping kit, which includes the following components:

• NI cRIO-9030 controller

• NI-RIO Device Driver CD

Note NI-RIO 14.0 is the earliest supported driver for the cRIO-9030.

• Two ferrites

• SD card slot cover

• Power screw terminal connector plug

• A-to-B device port USB cable

Caution National Instruments requires the use of a locking USB cable, such as part

number 157788-01, in order to meet the shock and vibration specifications of this

product.

 A host computer running Windows, with NI software installed in the following order:

a. LabVIEW

b. LabVIEW Real-Time Module

c. LabVIEW FPGA Module (recommended)

d. NI-RIO Device Driver

Note Visit ni.com/info and enter the Info Code rdsoftwareversion to

determine which software versions you need to use the cRIO-9030 and supported

C Series modules. LabVIEW 2014, the LabVIEW Real-Time Module 2014, and the

LabVIEW FPGA Module 2014 are the earliest supported software versions for the

cRIO-9030.

 A DC power supply as described in the Power Requirements section.

 C Series I/O modules (optional)

 A #2 Phillips screwdriver

 A #1 Phillips screwdriver

 A small flat-blade screwdriver

 Ethernet cable (optional)

 Panel, DIN rail, rack or desktop mounting kit (optional)

 Four M4 screws for mounting the chassis without one of the mounting kits (optional)

1 2 3 4 5 6 7 8 9 10 11 12 ... 44 45

Sem comentários

AMX USB LAN Driver USBLAN Instruções de Operação Página 7