AMX USB LAN Driver USBLAN Instruções de Operação

OPERATING INSTRUCTIONS AND SPECIFICATIONSNI cRIO-9030Embedded CompactRIO Controller with Real-Time Processor and Reconfigurable FPGAFigure 1. cRIO-9

10 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsFigure 3. Installing a Ferrite on the Power Leads3. Loosen the connector screw

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 117. Install the power connector on the front panel of the cRIO con

12 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsFinding the Controller on the Network (DHCP)The instructions in this section are

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 13NI-cRIO-9030-1856AAA. If you cannot find the system, refer to the

14 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsNote For information about SSH, go to ni.com/info and enter the Info Code opens

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 156. Click Change Password.7. Enter and re-enter the new password,

16 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsAdding the cRIO-9030 to a LabVIEW Project1. Launch LabVIEW. The LabVIEW Getting

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 171. Hold the RESET button for 5 seconds, then release it. The STAT

18 | ni.com | NI cRIO-9030 Operating Instructions and Specifications• Troubleshooting: I Cannot Find My CompactRIO or Single-Board RIO System in MAX

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 19Figure 6. cRIO-9030 Front View with DimensionsCaution Your inst

2 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsContentsSafety Guidelines ...

20 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsMeasure the ambient temperature at each side of the controller, 63.5 mm (2.50 in

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 21Note For more information about typical accuracy specifications

22 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsYou must use these screws because they are the correct depth and thread for the

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 23Mounting the Controller on a DIN RailYou can use the NI DIN rail

24 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsMounting the Controller on a RackNI offers two rack mount kits, part numbers 779

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 25Figure 16. Side View of the Controller Mounted on a Desktop, wit

26 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsFigure 17 lists the mini DisplayPort pins and signals. For up-to-date informatio

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 27Figure 18. Installing a Ferrite on Two USB CablesRefer to Figure

28 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsRefer to Table 3 for USB device port pin locations and signal descriptions.Cauti

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 29Table 4. LED Indications LEDLED Color LED State IndicationPOWER

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 3SD Card Removable Storage...

30 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsRJ-45 Ethernet PortsThe cRIO controller has two tri-speed RJ-45 Ethernet ports,

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 31Ethernet CablingTable 6 shows the shielded Ethernet cable wiring

32 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsFigure 20. RS-232 Serial Port Pin LocationsYou can use the Ring Indicator (RI)

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 33Caution To ensure the specified EMC performance, you must use an

34 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsSD Card Slot CoverYou must use the SD card slot cover to protect the SD card in

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 35Resetting the System CMOS and BIOS SettingsThe cRIO controller BI

36 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsUsing the cRIO-9030 File SystemThe file system of the cRIO-9030 follows conventi

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 37NI cRIO-9030 SpecificationsThe following specifications are typic

38 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsNetwork/Ethernet PortNumber of ports ...

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 39USB PortsNumber of portsDevice ports...

4 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsSafety Guidelines for Hazardous LocationsThe cRIO-9030 is suitable for use in Cla

40 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsNumber of DMA channels...16Internal Real-Time Clock

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 41EMC ratings for inputs as described in IEC 61000V1 ...

42 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsCaution Do not connect the system to signals or use for measurements within Mea

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 43Operating vibrationRandom (IEC 60068-2-64)...

44 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsNote For EMC declarations and certifications, and additional information, refer

© 2014 National Instruments. All rights reserved. 376257A-01 Aug14Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more inform

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 5Caution The enclosure must have a door or cover accessible only

6 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsHardware Symbol DefinitionsThe following symbols are marked on your cRIO controll

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 7What You Need to Install the cRIO-9030 The NI cRIO-9030 shippin

8 | ni.com | NI cRIO-9030 Operating Instructions and SpecificationsInstalling C Series I/O Modules in the ChassisComplete the following steps to ins

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 9Grounding the ChassisYou must connect the chassis grounding term