AMX NXD-500i Especificações descarregar pdf (Página 75)

Setup Pages and Descriptions

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Setting the image cache

In the Protected Setup page:

1. Press the Cache button in the Other Settings popup menu. This opens the Cache Settings page.

2. Set the cache expiration in the field Flash/RAM Cache Expires. The Up and Down arrows increment

through the available time frames.

3. Press the Enable button to turn on image caching. The button is illuminated when enabled.

Flash memory may be allocated for image caching, but RAM cache is always enabled.

Select the Up and Down arrows for the field Flash Cache Size to increase or reduce the amount of Flash

memory used; the maximum amount of flash that can be allocated for caching is 75% of available flash.

Clearing the image cache

In the Protected Setup page:

1. Press the Cache button in the Other Settings popup menu. This opens the Cache Settings page.

2. Press Clear Cache. This clears all image cache currently stored on the panel (both Flash and RAM).

Checking image cache status

In the Protected Setup page:

1. Press the Cache button in the Other Settings popup menu. This opens the Cache Settings page. All status

information is located in the Image Cache Status section of the page.

Password Settings Page

The options on the Password Settings page allow you to assign the passwords required for users to access the

Protected Setup page (FIG. 56).

Features on this page include:

FIG. 56 Password Settings page

Password Settings Page

Back: Saves all changes and returns to the previous page.

Wired icon: The icon to the left of the Connection Status Icon displays that the current connection

to the Master is Wired (image of three networked computers).

Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state of

the panel to the master.

• Bright red - disconnected

• Bright green - connected. Blinks when a blink message is received to dark green

every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain yellow

for 3 missed blink messages and then turn red. It will return to green when a blink

message is received.

Note: a Lock appears on the icon if the panel is connected to a secured NetLinx

Master.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 153 154

Sem comentários

AMX NXD-500i Especificações Página 75