AMX NXD-500i Especificações descarregar pdf (Página 62)

Setup Pages and Descriptions

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Panel Information Page

The Panel Information page (FIG. 42) centers around Modero panel properties that include resolution used,

on-board memory, firmware, address/channel information, and string information.

The elements of the Panel Information page are as follows:

Project Information Page (Cont.)

AMX IR Ports: Displays the AMX 38 kHz IR channel port used by the IR receiver on the panel.

• This information is pulled by the panel from AMX IR Receivers section of the TPD4

Project Properties > IR Emitters & Receivers tab.

• For IR reception, this is the port that reports a push on for the corresponding IR

code.

• IR receivers and transmitters on G4 panels share the device address number of the

panel.

Build Number: Displays the build number information of the TPD4 software used to create the

project file.

Creation Date: Displays the project creation date.

Revision Date: Displays the last revision date for the project.

Last Save Date: Displays the last date the project was saved.

Blink Rate: Displays the feedback blink rate (10th of second).

Job Comments: Displays any comments associated to the job. These comments are taken from the

TPD4 project file.

FIG. 42

Panel Information page

Panel Information Page

Back: Returns to the previously active touch panel page.

Wired icon: The icon to the left of the Connection Status Icon displays that the current connection

to the Master is Wired (image of three networked computers).

Connection Status icon: This visual display of the connection status allows the user to have a current visual

update of the panel’s connection status, regardless of what page is currently active.

• A Lock only appears on the icon if the panel has established a connection with a

currently secured target Master requiring a username and password.

Panel Type: Displays the model of the Modero panel being used.

Firmware Version: Displays the G4 firmware version being used by the panel.

• Verify that the panel has the latest version from www.amx.com.

Setup Port: Displays the setup port information/value being used by the panel.

High Port: Displays the high port (port count) value for the panel.

High Address: Displays the high address (address count) value for the panel.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 153 154

Sem comentários

AMX NXD-500i Especificações Página 62