4
Supports AMX HDCP InstaGate Pro Technology
When used with an Enova DGX Digital Media Switcher
the key support is up to 16 sinks per output,
independent of source device
When used with Enova DGX 8/16/32/64 Digital Media
Switchers the HDMI and VGA EDID is passed from
the Enova Switcher input to the TX and is user re-
programmable, see the "Enova DGX Digital Media
Switcher Instruction Manual" for supported EDID
resolutions for each board type
Propagation Delay (Typical)
4.95 Gbps / 6.75 Gbps
6.75 Gbps supported if Scaler on corresponding output
board or DXLink Fiber RX is set to Bypass mode and
format is 1080p60 or less
165 MHz / 225 MHz
225 MHz supported if Scaler on corresponding output
board or DXLink Fiber RX is set to Bypass mode and
format is 1080p60 or less
Dolby TrueHD, Dolby Digital, DTS-HD Master Audio,
DTS, 2 CH through 8 CH L-PCM Dolby Digital and DTS
support up to 48kHz, 5.1 channels
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
(1) HD-15, breakout cable required for RGB formats
RGBHV, RGBs, RGsB
YPbPr (HDTV)
Y/c (S-Video), C (Composite)
Progressive Resolution Support
480p up to 1920x1200 @ 60 Hz including but not
limited to those resolutions shown in the “Instruction
Manual – DXLink Fiber Transmitters and Receivers”
Interlaced Resolution Support
480i, 576i, 1080i including but not limited to those
resolutions shown in the “Instruction
Manual – DXLink Fiber Transmitters and Receivers”
If input is interlaced, all scaled outputs will deinterlace
video to a progressive resolution format. If in scaler
Bypass mode interlaced input will pass through
RGB Input Signal Level Range
HV Sync Input Signal Level Range
Y/Pb/Pr Input Signal Level Range
1.0 Vpp for Y, 700 mVpp for Pb Pr
Y/c (S-Video) Input Signal Level Range
1.0 Vpp for Y, 1.0 Vpp for c
Y/c (S-Video) Input Impedance
C (Composite) Input Signal Level Range
C (Composite) Input Impedance
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais