AMX NXT-CV10 Especificações descarregar pdf (Página 56)

Installation

10" Modero Touch Panels

Wiring a power connection

To use the 2-pin 3.5 mm mini-Phoenix connector for use with a 12 VDC-compliant power supply, the

incoming PWR and GND wires from the external source must be connected to their corresponding locations

on the connector (FIG. 44).

1. Insert the PWR and GND wires on the terminal end of the 2-pin 3.5 mm mini-Phoenix cable. Match the

wiring locations of the +/- on both the power supply and the terminal connector.

2. Tighten the clamp to secure the two wires. Do not tighten the screws excessively; doing so may strip the

threads and damage the connector.

3. Verify the connection of the 2-pin 3.5 mm mini-Phoenix to the external 12 VDC-compliant power supply.

Audio/Video Port: Connections and Wiring

The following table shows the signal and pinout/pairing information used on the RJ-45 Audio and Video

connections.

Ethernet/RJ-45 Port: Connections and Wiring

FIG. 45 describes the blink activity for the Ethernet 10/100 Base-T RJ-45 connector and cable. The Ethernet

cable is connected to the rear of Table Top and side of the Wall Mount panels.

FIG. 44

NetLinx power connector wiring diagram

Audio/Video RJ-45 Pinout Information

Pin Wire Color Function Polarity

1 Orange/White Right Audio In +

2 Orange Right Audio In -

3 Green/White Video In -

4 Blue Mic Out -

5 White/Blue Mic Out +

6 Green Video In +

7 White/Brown Left Audio In +

8 Brown Left Audio In -

FIG. 45

Ethernet connector (showing communication and connection LEDs)

PWR +

GND -

To the Touch Panel

Power Supply

TIA 568B

1 2 3 4 5 6 7 8

RJ-45 connector - pin configurations

(female) (male)

ETHERNET

10/100

A L

A - Activity LED (yellow)

lights when receiving or

transmitting Ethernet

data packets

L - Link LED (green) lights when

the Ethernet cables are connected

and terminated correctly.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 207 208

Comentários a estes Manuais

Sem comentários

AMX NXT-CV10 Especificações Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Monitor tátil AMX NXT-CV10