AMX D-1000 Especificações descarregar pdf (Página 33)

Upgrading Firmware

MXD/T-1000 10.1" Modero X Series® Touch Panels

Upgrading from Previous Firmware

The MXT-1000 and MXD-1000 allow the option to revert the device to the previous firmware run before an upgrade. To

upgrade the device from previously loaded firmware:

1. From the Settings page, select the Configuration page.

2. From the Configuration page, select Admin.

3. From the Admin Configuration page, select Install Firmware.

4. In the Firmware Installation page, select Previous.

5. The Confirmation Dialog box (FIG. 26) will ask “Are you sure you want to install the following firmware?” The

option to choose Yes will be enabled after five seconds. Press Ye s to load the firmware listed, and No to return to the

Firmware Installation popup window.

6. If you choose Yes , the device will retrieve the files and then reboot.

Returning to Factory Default Firmware

The MXT-1000 and MXD-1000 allow the option to return the device to its original factory default firmware, which may

be necessary in certain situations. To return the device to its factory default firmware:

1. From the Settings page, select the Configuration page.

2. From the Configuration page, select Admin.

3. From the Admin Configuration page, select Install Firmware.

4. In the Firmware Installation page, select Factory.

5. The Confirmation Dialog box (FIG. 26) will ask “Are you sure you want to install the following firmware?” The

option to choose Yes will be enabled after five seconds. Press Ye s to load the firmware listed, and No to return to the

Firmware Installation popup window.

6. If you choose Yes , the device will retrieve the files and then reboot.

FIG. 26 Previous Firmware installation confirmation dialog

FIG. 27 Previous Firmware installation confirmation dialog

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

Sem comentários

AMX D-1000 Especificações Página 33