AMX NetWave Server AXR-NWS Especificações descarregar pdf (Página 94)

AXC-SMP

SMPTE Time Code Card

FG744

Audio/visual events, multi-image presentations and multi-scene lighting events

require a standardized method of synchronization for material during

presentations and performances. The Society of Motion Picture and Television

Engineers (SMPTE) has formulated an industry-wide standard by creating a

digital encoding/decoding process. The AXC-SMP SMPTE Time Code Card

can receive time code from any audio source such as videotape, audio reel-to-

reel and cassette decks. This allows precise, simultaneous operation of Axcess

functions and other events.

APPLICATION

• Sends and receives SMPTE time codes using line-level audio

• 1/10 second accuracy

CONTROL PORT

• SMPTE input and output

INCLUDES

• Two status LEDs for transmit and receive

POWER REQUIREMENT: 45 mA @ 12 VDC

AXC-INP8

8 Input Card

FG785

The AXC-INP8 Switch Opto Voltage Input Card provides eight inputs that can

respond to switch closures or voltage level (high/low) changes. Input signals

may originate from tape transports, limit switches, foot mats or the AMX PCS

Power Current Sensor. Each input may be set for either switch closure (SW) or

voltage operation (VO), allowing a combination of either application on the

same AXC-INP8 card. Inputs set to the switch mode share the same Axcess

system ground. When an input is set to voltage mode, it is opto-isolated from

the system and can accept AC or either polarity DC signals.

APPLICATION

• Receives switch closures or logic high-/low-frequency level changes

CONTROL PORTS

• Eight input channels, 28 VDC or 24 VAC maximum

• Input closures act as Axcess channel Push or Release

• Voltage level below 1.5 V is read as a logic low (Push or On)

• Inputs set to voltage operation are opto-isolated

INCLUDES

• Eight channel status LEDs

• Eight pairs of micro-jumpers change channels from switch to voltage operation

AXC-MIDI

MIDI Interface Card

(Musical Instrument Digital Interface)

FG745-K

The AXC-MIDI MIDI Interface Card provides control to the following devices for

integration with other studio devices such as lights, volume and non-MIDI

devices: Music keyboards, mixers, electronic instruments, equalizers, routing

switchers, recording/reproducing decks, computers and control systems.

APPLICATION

• Controls mixers, equalizers and other devices that use MIDI communication

CONTROL PORTS

• MIDI In, Out and Through

INCLUDES

• Three status LEDs for MIDI In, Out and Thru Cable for MIDI Out

POWER REQUIREMENT: 20 mA @ 12VDC

AXC-IR/S

IR/Serial Card

FG740

Most audiovisual devices, such as audio and video cassette recorders, compact

disc players and tuners, can be remotely controlled by either infrared (IR) or

serial data commands. The AXC-IR/S Infrared Serial Card generates

programmed commands speciﬁc to each device by manufacturer, model

number and function. Up to 128 functions can be programmed into each card.

As needs and technology change, existing cards can be reprogrammed and

new cards can be added to the system. One Infrared/Serial Card is required for

each device.

APPLICATION

• Stores and transmits IR and IR/serial control commands

• Commands stored in non-volatile memory

CONTROL PORT

• IR control port with IR emitter and IR/serial connections

INCLUDES

• One status LED for transmit

• One micro-jumper sets card for No Carrier or Normal operation

• One CC-IRC or CC-SER control cable

POWER REQUIREMENT: 45mA @ 12 VDC

AXCESS CONTACT CLOSURE CARDS

AXCESS DATA CONTROL CARDS

AXC-SLD

Slide Projector Control Card

(US Kodak

series)

FG720-K

The AXC-SLD Slide Projector Control Card provides commands for forward,

reverse, focus in and focus out. With the optional AMX PC1 Power Controller,

this card also provides AC Power on/off. Each projector requires one card, and

up to 255 slide projectors can be controlled in one system with additional AMX

CardFrames and cards. The AMX-SLD is designed for the Kodak series of

slide projectors. It may also be used with compatible models. Two extra AUX

relays are provided for additional user controls.

APPLICATION

• Relay control of US Kodak-style slide projector

CONTROL PORTS

• Five relays for Forward, Reverse, Focus in, Focus out and Power on/off

• Two auxiliary relay channels for special applications

INCLUDES

• Seven channel status LEDs

• One Kodak-style EBY control cable

POWER REQUIREMENT: 50 mA @ 12 VDC (card only)

AMX reserves the right to alter speciﬁcations without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 117 118

Comentários a estes Manuais

Sem comentários

AMX NetWave Server AXR-NWS Especificações Página 94

Comentários a estes Manuais

Manuais e produtos relacionados com Servidores AMX NetWave Server AXR-NWS