AMX APEX Destiny 6100 Especificações descarregar pdf (Página 68)

Create Control Channels: Channel 1: Enable channel (4097,001), control aux output 9 (4119,009)

Channel 2: Enable channel (4121,001), control X-10 CHU# C-1 (4142, 064))

Channel 3: Enable channel and preset dim (4145,017 / 4148,002),

control X-10 CHU# C-2 (4166,065), set dim level 4 (4168,004).

Create Chain Channel: Channel 10: Enable channel (4313,001), enable chain channel (4315.001),

set chain 1 (4334,001). There are 8 available "banks" of channels that receive

commands when the chain channel is activated. The "Chain Group Assignments" table

provides the locations for the 8 sets of chains. In this scenario 3 of the 16 available

slots are being used in chain group #1.

Channel Activation #1 = 001

Channel Activation #2 = 002

Channel Activation #3 = 003

This tells the system to activate channels 1,2, and 3 each time unit 10 turns on or off.

Activate the Chain: The time programming for channel 10 will control channels 1, 2 and 3. In addition, if a

user selects channel 10 in remote control, all 3 channels will turn on and channel 3

will dim.

Channel Activations

This feature is not UL listed for fire or burglary functions and is intended for home automation

Channels behave differently when they are triggered manually by a user versus when they are internally activated

by the system. The Preset dim function will not function if a channel is directly accessed by a user. If dimming is

enabled the channel can be manually dimmed; however the unit will always start at fully on. If a channel is

turned on by the system (time, zone open / close, chain channel, system trigger) the device will be turned on and

set to the preset dim level (if programmed). This has been implemented in this manner to ensure the dim level

spoken during remote control access correctly matches the actual dimming level of the device. To achieve a

preset dim level of a device through remote control, program a chain channel that controls the target control

channel. Only Off and On will be available through remote control. An On will activate the target channel

causing the device to turn on and automatically dim.

User

Activation

System

Triggers

Zone

open/close

Chain

channels

Time of

day

Control Channel 1

Control Channel 2 Control Channel 3 Control Channel 4

Control Channel 5

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 83 84

Sem comentários

AMX APEX Destiny 6100 Especificações Página 68