
Advanced Configuration Interface
HD-15 (RGBHV, RGBs, RGsB, Y/Pb/Pr,
Y/c / S-Video, composite – breakout cable
is required for non RGBHV formats)
S/PDIF Digital Audio Input
RJ-45 Connector, TCP/IP Port (ICS LAN 10/100)
3.5mm Pluggable Phoenix Terminal Block
Bidirectional RS-232
Standard NetLinx Baudrate 1200-115k
Parity support Odd/Even/None
3.5mm Mini-Stereo Jack
Port for IR03 Receiver (Optional)
3.5mm Pluggable Phoenix Terminal Block
Port for IR01 Emitter (Optional)
Places system in NetLinx Device ID assignment mode
Green indicates whether or not the module is powered on
Green LED indicates the presence of video signals through the module
Green LED indicates the presence of audio signals through the module
3 Green LEDs, 1 lights to indicate the presence of the type
of analog video through the Multi-Format TX (composite,
Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS)
Red LED lights during the transmission of IR data via the rear IR port
Yellow LED lights during the receipt of IR data via the rear IR port
Red LED shows serial transmit (TX) data activity
Yellow LED shows serial receive (RX) data activity
Green LED lights when the Ethernet cable is connected and an active
link is established. This LED also blinks when receiving Ethernet data
packets
Green LED lights when the Controller is programmed and
communicating properly
Yellow LED shows CEC data activity when in point-to-point mode
Yellow LED shows USB (HID) activity
Comentários a estes Manuais