AMX NXR-ZRP Informações Técnicas descarregar pdf (Página 21)

Setting up a network

NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater

Setting up a network

Overview

The NXR-ZGW-PRO and NXR-ZRP-PRO constitute the full Master-to-Device control solution via a ZigBee

Pro wireless personal area network (PAN) using a mesh topology A variety of individual devices that can be

controlled or be the source of input to the system are supported.

This diagram in FIG. 7 shows MIO-R3 and MIO-R4 remotes connecting to a network via a NXR-ZGW

gateway and multiple NXR-ZRP repeaters.

ZigBee networks utilize a mesh topology, in that devices may interconnect, known as roaming, with different

ZigBee transceivers in an effort to get the best possible signal. The transceivers are known as parents. A

ZigBee network may contain at most one parent device that acts as a Coordinator.

FIG. 7 NXR-ZGW-PRO and NXR-ZRP-PRO Deployment View

When using ZigBee Pro firmware for a new or existing ZigBee network, you should

ensure that the network’s Master is upgraded to firmware version 3.41.422 or later.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 45 46

Sem comentários

AMX NXR-ZRP Informações Técnicas Página 21