AMX Current Sensors PCS Manual de Instruções

instruction manualControl System AccessoriesPCS and PCS2Power Current Sensors

Installation6PCS and PCS2 Power Current SensorsPCS to Television ControllersFIG. 5 illustrates the connections required for the PCS to television cont

Calibration7PCS and PCS2 Power Current SensorsCalibrationThe PCS and PCS2 work by setting a threshold. The STANDBY threshold is set be-tween the curre

Calibration8PCS and PCS2 Power Current SensorsIf the unit has both STANDBY and ON states, follow these steps:1. Turn the STANDBY and ON potentiometers

Calibration9PCS and PCS2 Power Current SensorsPCS2 CalibrationWhen extreme accuracy is required for calibration, allow the PCS2 to warm up for a minim

Calibration10PCS and PCS2 Power Current Sensors

Operation and Programming11PCS and PCS2 Power Current SensorsOperation and ProgrammingPCS OperationWhen properly calibrated, the PCS senses current le

Operation and Programming12PCS and PCS2 Power Current Sensors! A one- or two-second delay.! Verification of status changes.During transitions between

Operation and Programming13 PCS and PCS2 Power Current Sensors

AMX reserves the right to alter specifications without notice at any time.brussels • dallas • los angeles • mexico city • philadelphia • s

AMX Limited Warranty and DisclaimerAMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three

Table of ContentsiPCS and PCS2 Power Current SensorsTable of ContentsProduct Information ...

iiPCS and PCS2 Power Current SensorsTable of Contents

Product Information1PCS and PCS2 Power Current SensorsProduct InformationThe Power Current Sensors (PCS) and Dual Power Current Sensors (PCS2) provide

Product Information2PCS and PCS2 Power Current Sensors

Installation3PCS and PCS2 Power Current SensorsInstallationThe PCS requires +12 VDC (+11 VDC to +17 VDC @ 20 mA minimum) for operation; the PCS2 is si

Installation4PCS and PCS2 Power Current SensorsPreparing captive wiresYou will need a wire stripper and flat-blade screwdriver to prepare and connect

Installation5PCS and PCS2 Power Current SensorsPCS2 to AXC-INP8Connect the PCS2 output ports to the AXC-INP8 input ports, as illustrated in FIG. 2. Fo