AMX CP-15 Manual de Instruções descarregar pdf (Página 7)

Introduction

CP-15 Instruction Manual

The Input and Output Keys illuminate depending on the mode (the type of operation) the CP-15 is in:

 Blue key – indicates that it can be selected as part of the current operation.

 White or flashing white key – indicates that it has been selected and that further action is

required to complete the operation. A white key can also indicate routing status. When

a key is flashing, it cannot be unselected and does not display label information on the

LCD when pressed.

 Non-illuminated key – is not available for the current operation, e.g., Input Keys are

unavailable when the panel is in Output Volume Mode.

FIG. 4 shows various keys states while in Change Mode. Input 9 is flashing white, indicating that it was

selected first. Outputs 3 and 13 are white, indicating that they have also been selected (and can be

unselected). The switch from Input 9 to Outputs 3 and 13 will be executed when the Take Key is pressed.

Note that Inputs 18, 19, and 20 are not available.

FIG. 4 Example of key states during Change Mode

Available Key

Selected Keys

Unavailable Keys

Selected Key

Flashing

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

Sem comentários

AMX CP-15 Manual de Instruções Página 7