AMX Advanced Classroom Transmitter TXC-ACT Manual do Utilizador descarregar pdf (Página 5)

communications to a PC for system configuration and

diagnostics

Configuration Dip Switch

8-position Master configuration DIP switch allows

setting the Serial Programming port baud rate and

onboard Master execution mode (PRD or normal)

ID Pushbutton

Black ID pushbutton sets the NetLinx Device ID

assignments of the Internal Control Device. It has no

effect on the Internal Switcher Device

Status Indicator

Status LED (green) blinks to indicate that the system is

programmed and communicating properly

Input Indicator

Input LED (yellow) blinks to indicate that the Controller

is receiving data

Output Indicator

Output LED (red) blinks to indicate that the Controller

is transmitting data

CONTROL PORTS & INDICATORS

AxLink Port

(1) AxLink Port: 1 3.5 mm captive-wire connector

provides data and power to external control devices

AxLink Indicator

(1) AxLink LED (green) indicates the state of the AxLink

port

I/O Channels

(1) 6-Pin 3.5 mm (female) captive-wire connector

8-channel binary I/O port for contact closure with each

input being capable of voltage sensing

NetLinx Port 17

Channels 1-8

I/O Indicator

(8) LEDs (yellow) indicate that one or more of the I/O

channels (1-8) are active

IR/Serial

(2) 8-pin 3.5 mm (female) captive-wire connectors

8 IR Transmit / 1-way Serial ports

NetLinx Ports 9-16

Supports high-frequency carriers up to 1.142 MHz

8 IR/Serial data signals can be generated

simultaneously

IR/Serial Indicators

(8) LEDs (red) indicate that one or more of the IR/Serial

ports (1-8) are transmitting control data

Relays

(4) single-pole, single-throw relays

(2) 8-pin 3.5 mm (female) captive-wire connectors

NetLinx Port 8

Channels 1-8

Each relay can switch up to 24 VDC or 28 VAC @ 1 A

Each relay is independently controlled

Relay Indicators

(8) LEDs (red) indicate that one or more of the relay

channels (1-8) are active (closed)

RS-232/422/485 Ports

(6) bi-directional RS-232/422/485 serial ports

(6) DB9 Male Connectors

NetLinx Ports 1-6

XON/XOFF (transmit on / transmit off)

CTS/RTS (clear to send/ready to send)

300 - 115,200 baud

RS-232/422/485 Indicators

(6) sets of LEDs (red/yellow) indicate that RS-

232/422/485 Ports (1-6) are transmitting or receiving

data

INTEGRATED MATRIX SWITCHER CONTROL

Switch Pushbutton

Press to enter the SWITCH menu on the LCD display.

Choose to switch audio, video or both from any input

to any output. Press the TAKE pushbutton to

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

AMX Advanced Classroom Transmitter TXC-ACT Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Equalizadores AMX Advanced Classroom Transmitter TXC-ACT