AMX ALD-H48 Manual de Instruções descarregar pdf

HomeWorks®/AMX inconcert Processor

HP5-H48-AMX-120 (AMX Model: ALD-H48-AMX-INT)

12 V 60 Hz 30 VA

Please Read Before Installing

Overview

The HP5-H48-AMX-120 Processor allows connection of

HomeWorks Wired Keypads and HomeWorks Wired

Maestro

® Local Lighting Controls. The central processor

provides lighting presets and easy integration into an

AMX system.

A maximum of 24 Designer-Style keypads may be

connected to and powered by the Keypad Link on the

HP5-H48-AMX-120 Processor.

Important Notes

Codes: Install in accordance with all local and

national electrical codes.

Power: Two separate power inputs exist on this

processor:

1. Processor power is provided by the 2 conductor

harness that is integral to the HWI-LV24 enclo-

sure. The processor is powered when the green

LED labeled “PWR” is on.

2. Connected keypads are powered by the supplied

plug-in adapter connected to the power jack

labeled “Keypad Link 15 V ”. The Keypad Link

is powered properly when the green “Keypad

LINK PWR” LED is on. If the red “LINK SHORT”

LED is on, the Keypad Link is shorted (between

terminal 1 and 2) or overloaded (exceeding 150

LEDs).

Both Processor power and Keypad Link power must

be present for the processor and keypads to function

properly.

Processor Power: 12 V 30 VA

Keypad Link Power: 15 V 900 mA NEC Class 2;

IEC PELV

Use only the adapter provided by Lutron with

the HP5-H48-AMX-120 Processor.

Environment: Ambient operating temperature:

0-40 °C, 32-104 °F, 0-90% humidity, non-condensing.

Indoor use only.

Cleaning: To clean, wipe with a clean damp cloth. DO

NOT use any chemical cleaning solutions.

Figure 1 - HP5-H48-AMX-120 Processor

Installation Instructions

1. Ensure High-voltage cover in HWI-LV24 enclosure is

securely installed. Locate and lock supply breaker in

the OFF position before installing processor assembly.

Danger - Wiring with power on may result in

personal injury.

2. Install processor assembly in the enclosure: The

HP5-H48-AMX-120 Processor is attached to the HWI-

LV24 enclosure using four mounting keyholes and the

mounting screws provided.

3. Ensure all DIP

switches are in the down position.

4. Connect to HomeWorks lighting controls. Connect

the communication wiring from the HomeWorks

Maestro Dimmers to the factory installed Dimmer Hub.

See Figure 3, page 2. Gray and violet connections are

marked on the printed circuit board.

Installation

Figure 2 - Mounting

Diagram

The HP5-H48-AMX-120

Processor mounts in the upper

left corner of an HWI-LV24

enclosure.

High-voltage enclosure

(shown with cover installed).

Down (OFF)

Up (ON)

Example: Setting Switch #6 ON.

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - Installation

HomeWorks®/AMX inconcert ProcessorHP5-H48-AMX-120 (AMX Model: ALD-H48-AMX-INT)12 V 60 Hz 30 VA1Please Read Before InstallingOverviewThe HP5-H48-AMX-

Página 2 - ® Wired Maestro®

MountingKeyhole (4places)ProcessorLabelProcessorBoardTo HomeWorksKeypadsFigure 3 - HomeWorks/AMX inconcert ProcessorTo HomeWorks® Wired Maestro®contr

Página 3 - Quick Start Guide

3Quick Start GuideFor more detailed programming instructions, refer to theALD-H48 Instruction Manual available on-line atwww.amx.com.OverviewThe ALD-H

Página 4 - Bus Address Location

4Step 5: Addressing The Dimmers via The WebInterfaceOnce you have installed the ALD-H48 and dimmers usingthe hardware installation literature included

Página 5 - FIG. 7 Modify Group

5Establishing And Modifying ScenesOnce your dimmers have been addressed and states set,you can create a scene. A scene is a collection of dim-mers wit

Página 6

6Notes:

Página 7

7Notes:

Página 8 - LIMITED WARRANTY

Lutron Electronics Co., Inc. 7200 Suter RoadCoopersburg, PA 18036-1299Made and printed in the U.S.A. 7/05 P/N 043-222 Rev. ATechnical and Sales Assis